BioMS Application Link:https://bioms.wustl.edu/bioms/
Looking for help? Email email@example.com
Or Phone 1(855)-55-BIOMS or 1(855)-552-4667
The Alliance Biospecimen Management System (BioMS) is a web-based application for registering and tracking shipment of patient biospecimens collected from any Alliance or legacy CALGB, ACOSOG, or NCCTG trial. It serves a similar function as the previous CALGB specimen tracking tool, STS. BioMS also provides access to a comprehensive inventory of all specimens collected across all Alliance group biorepositories.
When BioMS is live, all biospecimen submissions for Alliance trials and legacy CALGB, ACOSOG, and NCCTG trials should be registered in BioMS. This is true even if you were previously using CALGB STS or CRF forms to complete biospecimen submissions. Even if you previously used STS or paper CRF forms to submit an initial set of specimens for a trial participant, any further biospecimen submissions, even for that same participant, should be registered and shipped using the BioMS application.
Yes. RAVE and BioMS are currently independent systems. Regardless of what data or forms you are required to submit to RAVE regarding biospecimen submission, you still must register and ship biospecimens using the BioMS application.
You will need a computer (desktop, laptop, or tablet) with most any current version of a web browser (e.g. Internet Explorer, Safari, or Firefox) and access to the Internet.
You will need your CTEP ID and password to log into BioMS, even if you have already logged into the Alliance member web site. You will need the patient study number and/or the protocol number corresponding to the biospecimens that you have collected, in order to locate the patient registration in BioMS. BioMS will request that you indicate which of the required protocol biospecimens have been collected, the quantity of material collected, and the date of collection. Some specimens for some protocols may require additional information to be entered into BioMS (see specific protocol instructions).
BioMS will be activated for all Alliance trials after the Go-live date. In cases where there is a temporary, planned outage of BioMS, you should receive a broadcast message by email. If you are able to access other Internet sites on your computer, but cannot access BioMS, call the BioMS Help Desk at 1-855-55-BIOMS (1-855-552-4667). If you have no Internet access on your computer, please contact your local computer support desk.
You will need your CTEP ID and password to log into BioMS, even if you have already logged into the Alliance member web site. If you do not have a CTEP user ID or have forgotten your user ID or password, please visit https://eapps-ctep.nci.nih.gov/iam/ForgotPassword.do. If you have a correct user ID and password but still cannot log into BioMS, please contact the BioMS Help Desk at 1-855-55-BIOMS (1-855-552-4667).
BioMS has a user interface and functionality very similar to the former CALGB STS system. A full set of user manuals, FAQs, and training videos are available at the BioMS help site: BioSpecimen Management System - BioMS. For immediate answers to more specific questions, please contact the BioMS Help Desk at: 1-855-55-BIOMS (1-855-552-4667) or by clicking on the ‘Help’ link on the BioMS log in or application pages.
Participant registration will be performed in the OPEN system, not BioMS. BioMS receives electronic messages from the OPEN system that will register the participant on the appropriate study(s) in BioMS without user intervention.
YES. All biospecimens collected for any Alliance trial or legacy ACOSOG, NCCTG, or CALGB trial must be registered in BioMS prior to shipment to one of the Alliance biorepositories or assay laboratories. BioMS will allow you to create and print a packing list to be included with the biospecimen shipment. BioMS can also provide you with collection and shipping instructions. Note that in the future, sites may not receive credit for biospecimen submission unless biospecimens are first properly registered in BioMS prior to shipment to an Alliance biorepository.
Biospecimens should be registered in BioMS after they are physically collected. BioMS will require that you know the study, patient study number, collection time point, and date / time of specimen collection. However, you can always review specimen requirements and collection instructions in BioMS prior to collecting or registering any specimen. In all cases, biospecimens should be registered in BioMS, assigned to a shipment, and a packing list created and printed for inclusion in the shipment, prior to physically shipping specimens to an Alliance repository. In the event that biospecimens were shipped prior to their registration in BioMS, please call the BioMS Help Desk for further assistance: 1-855-55-BIOMS (1-855-552-4667).
Any biospecimen designated by the protocol to be shipped or transferred to another repository or laboratory location (with the exception of specimens collected for routine hospital laboratory testing) should be registered in BioMS.
All studies that involve biospecimen collection that are either actively accruing patients or are closed to accrual but require on-going biospecimen collection should be represented in BioMS. This includes new Alliance trials as well as legacy CALGB, ACOSOG, and NCCTG trials. If you can not find a study for which you are trying to collect and ship biospecimens, please contact the BioMS help desk: 1-855-55-BIOMS (1-855-552-4667).
All patients registered to any Alliance or legacy CALGB, ACOSOG, or NCCTG trial involving biospecimen collection should be represented in BioMS. This applies to any patient registered to a trial both before and after BioMS activation. If you are unable to locate a patient in BioMS that is registered to a study and from whom you are trying to collect and ship biospecimens, please contact the BioMS Help desk: 1-855-55-BIOMS (1-855-552-4667). You will need to provide your institutional affiliation, study name, patient study ID, and patient initials to the Help desk staff. Alternatively, you may contact the Help desk by email by clicking on the ‘Help’ link on the BioMS application.
Only specimens collected and registered in BioMS after the Go-Live date will initially appear in BioMS. Data concerning specimens previously collected and submitted via the CALGB STS system or on paper CRF forms will not be visible in BioMS. Such specimens will still appear as ‘Not Collected’ in BioMS specimen logging screen. This does not mean that these specimens need to be recollected. Over time, legacy data from STS and each Alliance biorepository inventory will be integrated into BioMS and the complete inventory of all specimens collected from all patients will be searchable and viewable in BioMS.
After Go-Live, STS will no longer be accessible. If you require access to STS for the purposes of reviewing previous data and/or biospecimen submissions made before Go-Live, please contact the BioMS Help Desk by email.
Site staff are strongly encouraged to attend one or more of the informational training webinars or review the on-line manuals and training videos available on the BioMS website prior to using BioMS. If immediate assistance is required while using BioMS to register and ship biospecimens, please call the BioMS Help Desk during its normal hours of operation: 1-855-55-BIOMS (1-855-552-4667).
If you are experiencing other technical difficulties or receive an error message while using BioMS, please call the Help Desk during its normal hours of operation: 1-855-55-BIOMS (1-855-552-4667).
For live support, the BioMS Help desk is open Monday through Friday from 8am to 7pm Central Time. If assistance is required before or after these hours, please email the BioMS Help Desk (click ‘Help’ on the BioMS application screen) with your contact information and brief description of the problem you are encountering. You will be contacted by phone or email within 8 working hours.
No, BioMS is used to track specimens only. Collection sites will need to call or email the Biorepository listed in the protocol to request kits.
No, BioMS does not create air bills, but rather creates the packing slip that MUST be sent with specimens. When the user selects manage shipments, the CRA indicates which courier is being used (in this case FedEx) and enters the Tracking number from the FedEx air bill that has already been created either via FedEx webpage or a pre-printed air bill. If a protocol has an approved pre-printed FedEx air bill, this air bill will be placed inside of the kit that is shipped to the site upon requesting the kit from the Biorepository. Pre-printed air bills are not the same as a pre-paid air bill. The Pre-Printed air bill contains information regarding the “ship to” address and shipping method (ie priority overnight).
Yes. Although the CRA sending samples will be notified by email if a sample received at the repository is unacceptable, it will be the responsibility of the CRA to verify the specimen status by logging into BioMs.
The recommended Browsers for the BioMs application are IE 9.0 , Mozilla Firefox 10.0.1 and if you have a Mac, Safari 5.1.2. If you notice that the BioMs application is appearing distorted on your screen, check to ensure you are using one of the recommended browsers. If you are not allowed to download applications or updates on your computer, contact your local IT department.
When the shipment is received at the BioReposity, the receiving staff with change the quantity field of the missing block to zero, and record the block as "Not in Shipment" in caTissue. The biorepository staff will then notify the CRA that the block was missing and needs to be collected and shipped in BioMs. The CRA will log into BioMs and navigate to the patient specimen checklist visit that contains the Paraffin block. The status of the block will be displayed as "Received-Not in Shipment". The CRA will need to click on the "recollect" icon and say yes to collect an additional specimen. This will create another specimen collection event below the first and allow the block to be logged as collected. The specimen checklist will then display two collection events for the block, with the first specimen having a quantity of zero, and a status of "Received-Not in Shipment", and the new specimen with the correct quantity and a status of "Collected". Once the block has been logged as collected, the CRA will add the block to a new shipment and send it on to the repository with the new packing slip.